HiModel
DUAL POWER INPUT SERVO DISTRIBUTION BOARD ECONOMY VERSION (W/O CDI REMOTE SWITCH)
| 1. Weight | 70g |
| 2. Steering engine’s working electricity | 0A-30A |
| 3. Working voltage | 4.8V-12.6V |
| 4. Working temperature | -20℃ to 85℃. |
| 5. Volume | 116mm(long)x 68mm(wide)x 13mm(height) |
| (Manufacturer product name | Min Steering engine Power distribution board) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: 1. Dual battery input effectively improve the power supply ...1 Reviews
HiModel
VISTA POWER 1-6S 5A/80W LI-POLY BALANCE CHARGER/DISCHARGER EV-680A
| Input voltage | 10.5-18.0V |
| charge power | max. 80W |
| Discharge power | max.8W |
| Discharge current range | 0.1~1.0A |
| Charge current range | 0.1-5.0A |
| Balance current | 250mA |
| NiCd/NiMH battery cell count | 1 - 15cells |
| LoPo/LiLo/LiFe battery cell count | 1 - 6cells |
| Pb battery voltage | 2V～20V |
, , , , , , Specifications:, , , , , , , , , , , specifications:, , ,
Features: Intelligent Balance Charger Microprocessor controlled high-performance rapid charger for ...HiModel
HIMODEL 5.8G 1000MW (1W) HIGH POWER TRANSMITTING MODULE (TX) -GOLDEN EDITION | SMA, JACK
| video format supported | NTSC/PAL |
| Connector type | SMA Jack (on the TX module side) |
| Transmitting power | 1000mW |
| Power input | 7.4-13V (3S Lipo suggested, does NOT support 4S Lipo) |
| Transmitting current | 600mA @12V |
, , , , , , Specifications:, , , , , , , , , , , HiModel 5.8G 1000mW (1W) High Power Transmitting Module (TX) -Golden Edition, Refer to here for connector type diagram, ,
Features: New 5.8G 1000mW Golden version. - Upgraded ball bearing ...HiModel
POWER MANAGEMENT MODULE FOR YS-X4 FLIGHT CONTROL
, , , , , , Specifications:, , , , , , , , , , , Power Management Module for YS-X4 Flight Control, , ,
HiModel
G.T.POWER FPV 5.8G 250MW A/V TRANSMITTING/RECEIVING COMBO (TX/RX) | RP-SMA, JACK
| Video Format | Pal/NTSC |
| Output impedance | 50 Ohm |
| Output power | 21-23 dBm |
| Transmitter operating voltage | 7.4-12.6 V DC/200mA |
| Video bandwidth | 0-8.0 MHZ |
| Audio input impedance | 10K/Ohm |
| Audio input level | 0.5-2.0 Vp-p |
| Audio frequency | 6.5 MHZ |
| Antenna connector | RP-SMA, jack (TX side) |
| Video input level | 0.8-1.2 Vp-p |
| Video input impedance | 75 Ohm |
| Dimensions | 55x26x17 mm |
| Weight | 25 g |
| Operating temp | -10~85 ℃ |
| Audio frequency | 6.5 MHz |
| Video input impedance | 75 Ohm |
| Audio input impedance | 10K/Ohm |
| Antenna connector | RP-SMA jack (RX side) |
| Channels 5.8G | 5705,5685,5665,5645,5885,5905,5925,5945 MHZ |
| Receiver operating voltage | 7.4~12.6 V DC |
| Video bandwidth | 0~8.0 MHz |
| Video input level | 0.8~1.2 Vp-p |
| Audio input level | 0.5~2.0 Vp-p |
| Weight | 43 g |
| Dimensions | 61x52x13 mm |
, , , , , , Specifications:, , , , , , , , , , , TX specs:, Channels: 8, See connector type diagram, RX specs:, Channels: 8, , ,
Includes/Requires: Includes: 1 x transmitting unit (TX) 1 x receiver ...1 Reviews
HiModel
G.T.POWER FPV 5.8G 250MW A/V TRANSMITTING MODULE (TX) ｜RP-SMA, JACK
| Video Format | Pal/NTSC |
| Output impedance | 50 Ohm |
| Output power | 21-23 dBm |
| Transmitter operating voltage | 7.4-12.6 V DC/200mA |
| Video bandwidth | 0-8.0 MHZ |
| Audio input impedance | 10K/Ohm |
| Audio input level | 0.5-2.0 Vp-p |
| Audio frequency | 6.5 MHZ |
| Antenna connector | RP-SMA, jack (TX side) |
| Video input level | 0.8-1.2 Vp-p |
| Video input impedance | 75 Ohm |
| Dimensions | 55x26x17 mm |
| Weight | 25 g |
, , , , , , Specifications:, , , , , , , , , , , Channels: 8, See connector type diagram, , ,
Includes/Requires: Includes: 1 x transmitting unit 1 x basic wires1 Reviews
HiModel
G.T. POWER PROFESSIONAL TACHOMETER
| Weight | 39g |
| Dimension | 90*54*16mm |
, , , , , , Specifications:, , , , , , , , , , , 1. press 'POWER' button for 1 second to power on/off., 2. Press 'SET' button to set the relevant propeller blades., 3. real time RPM value shown when you make the RPM sensor point to the blade within 10cm measurement distance., 4. maximum RPM value are displayed when measurement is finished., 5. backlit LCD are on/off when press 'SET' button for 3 seconds uninterrruptedly., , ,
Features: -To measure RPM of a spinnning propeller, 2-9 blades ...1 Reviews
HiModel
1/10TH SCALE ELECTRIC POWERED OFF ROAD MONSTER TRUCK RTR S94111
| HEIGHT | 185MM |
| TRACK | 150mm |
| GROUND CLEARANCE | 30MM |
| MOTOR | RC540 |
| BATTERY POWER | 7.2V 1800MAH |
, , , , , , Specifications:, , , , , , , , , , , TECHNICAL DATA, LENGTH 400MM, WIDTH 310MM, WHEELBASE 275MM, WHEEL DIAMETER(F/R) ø120*30MM, GEAR RATIO 10.3:1, *The car body cover color and pattern may different to the picture., , ,
Features: 1.4WD drive system 2.Extra large radio tray provides stable ...HiModel
THUNDER 1-6S 5A LIPO/LIFE BALANCE CHARGER/DISCHARGER T6
| Operating voltage | DC 11~18 volts |
| Charge/discharge power | max. 50/5 Watts |
| NiCd/MH | 1~15 cells |
| LiIo/LiPo/LiFe | 1~6 series |
| Charge current | 0.1 to 5.0A |
| Discharge current | 0.1 to 1.0A |
| No. of cycle | 1 to 5 times |
| Battery data memory | up to 5 data |
| Weight | 260g |
| Dimension | 140*95*28mm |
, , , , , , Specifications:, , , , , , , , , , , Specification, Pb: 2~20V, , ,
Includes/Requires: Includes:1 x charger 1 x Balance harness for Align/HiModel ...3 Reviews
HiModel
100-240V INPUT 1-6S 5A DUAL POWER LIPO/LIFE BALANCE CHARGER/DISCHARGER V6AC
| Operating voltage | DC 11~18 volts |
| Charge/discharge power | max. 50/5 Watts |
| NiCd/MH | 1~15 cells |
| LiIo/LiPo/LiFe | 1~6 series |
| Charge current | 0.1 to 5.0A |
| Discharge current | 0.1 to 1.0A |
| Weight | 647g |
| Dimension | 134x142x36mm |
, , , , , , Specifications:, , , , , , , , , , , Specification, Pb: 2~20V, Built in AC adapter, AC input 100-240V, , ,
Includes/Requires: Includes:1 x charger 1 x conversion cable set (4pcs) ...HiModel
VISTA POWER 1-6S 50W LI-POLY BALANCE CHARGER/DISCHARGER EV-650A
| Input voltage | 10.5-18.0V |
| charge power | max. 50W |
| Discharge power | max.5W |
| Discharge current range | 0.1~1.0A |
| Charge current range | 0.1-5.0A |
| Current drain for balancing LiPo | 300mah/cell |
| Data store | max. 5 data of batteries |
| NiCd/NiMH battery cell count | 1 - 15cells |
| LoPo/LiLo/LiFe battery cell count | 1 - 6cells |
| Pb battery voltage | 2V～20V |
, , , , , , Specifications:, , , , , , , , , , , specifications:, , ,
Features: Intelligent Balance Charger Microprocessor controlled high-performance rapid charger for ...2 Reviews
HiModel
VISTA POWER 1-8S 7A/150W LI-POLY BALANCE CHARGER/DISCHARGER EV-815A
| - Input voltage | 11-18.0V |
| - Charge power | max.150W |
| - Discharge power | max.25W |
| - Discharge current range | 0.1~5.0A |
| - Charge current range | 0.1-7.0A |
| - Current drain for balancing LiPo | 300mAh/cell |
| - Data store | max.10 data of batteries |
| - NiCd/NiMH battery cell count | 1 - 26cells |
| - LiPo/LiLo/LiFe battery cell count | 1 - 8cells |
| - Pb battery voltage | 2V～36V |
| - Trickle | 50-200mA |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, , ,
Features: Superb high charge rate intelligent 8S 150 watt charger ...HiModel
XQ-POWER 56G/16KG/ .12SEC 6-7.2V METAL GEAR DIGITAL SERVO XQ-S3015D
| Speed | 0.16 sec/60° @ 6V; 0.12 sec/60° @ 7.2V |
| Torque | 15kg-cm @ 6V; 16kg-cm @ 7.2V |
| Weight | 56g / 1.46oz |
| Power Supply | 6V/ 7.2V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 40.8, B: 20.1, C: 38, D: 48.5, E: 10, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
XQ-POWER 25G/2.9KG/ .09SEC DIGITAL SERVO XQ-S1016D
| Speed | 0.13 sec/60° @ 4.8V; 0.11 sec/60° @ 6V |
| Torque | 2.5kg-cm @ 4.8V; 2.9kg-cm @ 6V |
| Weight | 16g / 0.42oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 22.8, B: 12.6, C: 24.8, D: -, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
XQ-POWER 56G/10KG/ .14SEC 6-7.2V METAL GEAR DIGITAL SERVO XQ-S3009D
| Type | XQ-S3009D |
| Speed | 0.16 sec/60° @ 6V; 0.14 sec/60° @ 7.2V |
| Torque | 9kg-cm @ 6V; 10kg-cm @ 7.2V |
| Weight | 56g / 1.46oz |
| Power Supply | 6V/ 7.2V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , * The image is for reference only, the real type is S3009D., Dimension (mm): A: 40.8, B: 20.1, C: 38, D: 48.5, E: 10, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn set